联系人:陈建新  
  手机:13801511117
  电话:0510-85950803
  邮编:214128
  网址:www.wxssh.com
  邮箱:c85950803@163.com
  地址:江苏无锡市滨湖区南泉镇
螺旋板式换热器
Spiral plate heat exchangers
列管式冷凝器
Tube Condenser
  列管式换热器系列
Series tube heat exchanger
真空耙式干燥机
Vacuum rake dryer
  IG-1.5型列管式过滤器
IG-1.5-tube filter
不饱和聚酯树脂设备
Unsaturated resin coating equipment
  结片机干燥机
Crystallization (heating) Slicing Machine
  真空浓缩结晶锅
Vacuum concentration crystal pot
  不锈钢反应锅
Stainless steel reactor
 

【真空浓缩结晶锅
Vacuum concentration crystal pot

  整个设备可分为加热蒸发室、加热夹套、汽液分离器、搅拌器等四部分。我厂在夹套加热的基础上经多方面研究,设计了内加热、内循环加热,蒸发结晶锅、用户使用后反映其蒸发效果比外加热(夹套加热)高1.8倍。
  该设备与产品有接触部分,均采用1Cr18Ni9Ti制作,加热蒸发室、如一园筒壳体,为按装维修方便,采用不同厚度材料分两段加工,用法兰连接。封底可加工成半球形、碟形、或锥形器身上,下圆筒都装有视镜,以观察溶液沸腾状况,雾沫夹带高度,溶液的浓度,结晶大小及分布情况等;锅体内入孔是为方便清洗、维修,下锅部份焊上加热夹套,其高度通过计算蒸发所需面积而定。
  搅拌目前多采用锚式搅拌器,转速6-15转/分,搅拌的按装目前采用下轴安装,可缩短轴长度,便于安装维修。
The whole equipment can be divided into steam heating evaporation chamber, heating jacket, liquid separator, mixer and so on four parts. Our factory on the basis of the heating jacket by the various research, design the inner circulate in heating, heating, evaporation crystallization pot, reflect its evaporation effect after users than outer heating (heating jacket) 1.8 times higher.
The equipment parts contact with product, are made of 1 cr18ni9ti heating evaporation chamber, such as shell, for convenient maintenance, under the different thickness of the material is divided into two period of processing, use flange connection. Back cover can be processed into hemispherical, dish, or cone, cylinder is equipped with a sight glass, to observe the solution boiling condition, entrainment entrainment height, the concentration of the solution, the crystal size and distribution, etc. Pot into the hole in the body is convenient for cleaning, maintenance, the pot heating jacket on the part of welding, its high evaporation area required by calculation.
Mixing currently use anchor agitator, more speed 6-15 RPM, mixing with the shaft under the current installation, can shorten the axial length, ease of installation and maintenance.
真空浓缩结晶锅主要技术参数表(供参考)
公称容积M3
筒体高度H(mm)
筒体直径Φ(mm)
夹套直径Φ(mm)
转速r.p.n
电机功率kw
3
1700
1300
1400
6-15
5.5
4
2400
1400
1500
6-15
5.5
5
1800
1500
1700
6-15
7.5
6
3000
1800
2000
6-15
7.5
8
3000
1800
2000
6-15
10
10
3200
1800
2000
6-15
13
11.2
3200
2000
内加热
125-350
15
 
 
 
返回首页  ·   公司简介  ·  产品列表   ·  联系我们  ·  
 
无锡市昌明化工换热设备有限公司 Copyright 2009 - 2013 All rights reserved.