 |
| |
联系人：陈建新 |
| |
手机:13801511117 |
| |
电话:0510-85950803 |
| |
邮编：214128 |
| |
网址：www.wxssh.com |
| |
邮箱：c85950803@163.com |
| |
地址：江苏无锡市滨湖区南泉镇 |
|
 |
|
|
【填料塔】
Packed tower
|
规整填料塔的分离性能取决于内件，即填料、分布器、收集器等。同时也取决于许多参数，如气体负荷、液体负荷、物料性质、操作压力、填料湿润性能和液体分布不均匀等等。至今不能由填料的几何形状来精确计算塔的分离性能，需要通过填料塔的理论和不同条件下通过试验塔来测定准确数据。用户可根据资料以一级近似程度确定塔的尺寸和需要的填料高度。如果需要经济、合理的结构形式，我厂愿与用户密切合作。
Structured packing tower separation performance depends on the internal parts, namely, packing, distributor and collector, etc. At the same time, it depends on many parameters, such as gas, liquid load, material properties, operating pressure, packing wetting properties and the uneven distribution of liquid and so on. So far not by packing geometry to the precise separation performance of the tower, need through the packed tower theory and through experiments under different conditions to determine accurate data. Users can according to the data level degree of approximation to determine the size of the tower height of packing and need. If you need any economic and reasonable structure form, our factory is willing to work closely with the users. |
.jpg)
|
1、规整填料
2、支撑栅板
3、液体收集器
4、集液环
5、多级槽式液体分布器
6、填料压圈
7、支撑栅板
8、蒸汽入口管
9、塔底
10、至再沸器循环管
11、裙座
12、底座环
此结构适合于直径大于等于800mm的填料塔。
|
|
1、规整填料
2、支撑栅板
3、液体收集器
4、降液管
5、管式液体分布器
此结构适合于直径小于800mm的填料塔。
|
| |
|
